Wind Farms

General Information

North Sea

Baltic Sea

Clyde Region

Adriatic Sea

Eastern Mediterranean Sea

Wind Farms

Layer Info
Category	Human Activities
Sub-category	Energy
Energy Type	Green
Editable	Yes
Bathymetry Min	0m
Bathymetry Max	-150m
Resource	Wind Speed

Description

Offshore wind power or offshore wind energy is the use of wind farms constructed in bodies of water, usually in the ocean on the continental shelf, to harvest wind energy to generate electricity. Higher wind speeds are available offshore compared to on land, so offshore wind power’s contribution in terms of electricity supplied is higher, and NIMBY opposition to construction is usually much weaker. Unlike the typical usage of the term "offshore" in the marine industry, offshore wind power includes inshore water areas such as lakes, fjords and sheltered coastal areas, utilizing traditional fixed-bottom wind turbine technologies, as well as deeper-water areas utilizing floating wind turbines.

@Wikipedia

Wind farms can be combined with solar panels. One study by López, Rodriguez & Iglesias (2020) concerned the sea area north of Asturias, Spain (more or less the Spanish area in the Bay of Biscay) and concluded that the density of a combined wind and solar farm would be about 57.5 MW per km2.

MSP Challenge

Wind Farms are used to produce green energy, the production amount is calculated based on the maximum amount of energy that can be produced in the designated area.

Wind Farms are polygons, i.e., geometric shapes that you can draw in, edit or remove when making a plan. They create the following pressures on the ecosystem:

• Artificial Substrate
• Noise
• Surface Disturbance during construction only
• Bottom Disturbace during construction only

Return to energy.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitation.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Country		x
Shipping Lane	x
IMO Route	x
Port	x
Precautionary area		x
Anchorage	x
Oil and gas platform	x
Natura 2000		x
Bathymetry (> 60m)	x
Fishing priority area		x

Types

• 6MW
• 6MW floating

Pressure on Ecology

The ecological pressures are scaled on a level from 0 to 1; with 0 meaning no pressure, and 1 meaning the maximal impact on that pressure.

State	Artificial Substrate	Noise	Surface Disturbance	Bottom Disturbance
Under construction	0	1	0.5	0.8
In production	0.3	0.2	0.2	0

Wind farms disallow all the bottom trawl, and industrial and pelagic trawl fishing fleets. Drift and fixed nets fleets are only disallowed during construction.

Metadata

Data Source

The source of existing wind parks in The Netherlands has been updated for the Dutch EEZ according to data from the Rijkswaterstaat, retrieved on 2020-02. For the rest of the North Sea area the source is OSPAR.

Original Title

From rijkswaterstaat: Aangewezen windgebieden NWP

From OSPAR: Not available.

Description

From rijkswaterstaat: Not available.

From OSPAR: Details of the location and status of offshore renewable energy developments in the OSPAR region,

Creation Date

2017/10. Updated on 2020-02.

Methodology

The wind farms that are in operation were implemented in the energy simulation as such.

North Sea Digital Twin

The data layer 'Wind Farms - Implemented" is retrieved from EMODnet Human Activities and shows the existing Wind Farms.

In the Baltic Sea, the development of renewable energy is focused on wind farms. For the sake of allowing users to plan for different types of renewable energy in the Baltic Sea, the renewable energy accounts for wind, wave and tidal energy (see types below).

Types

At the moment in the Baltic Sea there are only 6MW wind turbines, but the following types are available for planning purposes:

• 6MW Wind
• 6MW Floating Wind
• 10MW Wind
• 3MW Wave
• 3MW Tidal

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Country		x
Shipping National Lane	x
Fairways	x
IMO Route	x

Pressure on Ecology

The ecological pressures are scaled on a level from 0 to 1; with 0 meaning no pressure, and 1 meaning the maximal impact on that pressure.

State	Artificial Substrate	Noise	Surface Disturbance	Bottom Disturbance
Under construction		1	0.5	0.8
In production	0.4	0.2	0.2	0

Data Source

HELCOM HOLAS II Dataset: Wind farms (2018)

Original Title

Wind farms

Description

"The data set contains information on the location of individual turbines of the offshore wind farms in the Baltic Sea area.

In addition to information on the location of the wind farms, the following information is included: Name, Country, Status (Generating power or under construction), Company, Capacity MW (whole park), number of turbines (whole park), construction year and source."

Description retrieved from HELCOM's metadata page for this resource (2021-07-19).

Creation Date

2016-04-06

Methodology

The wind farms that are in operation were implemented in the energy simulation as such.

Western Baltic Sea

The Wind Farms layer in the Western Baltic Sea Edition remains consistent with that featured in the Baltic Sea edition.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Shipping route	x

Types

• 6MW

Pressure on Ecology

The ecological pressures are scaled on a level from 0 to 1; with 0 meaning no pressure, and 1 meaning the maximal impact on that pressure.

State	Artificial Substrate	Noise	Surface Disturbance	Bottom Disturbance
Under construction	0.4	0.8	0	0.6
In production	0.4	0.2	0.5	0

Metadata

Not applicable. At the moment of development of the Clyde Marine Region edition there were no wind farms in the region. This layer exists just for planning purposes.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Shipping route	x

Types

• 6MW
• 6MW floating

Pressure on Ecology

Not applicable. Pressure calculation is not present in the Adriatic Sea Edition.

Metadata

Not applicable.

At the moment of development of the Adriatic Sea edition there were no wind farms in the region. This layer exists just for planning purposes.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Countries		x
Shipping route	x
Ports	x
Military areas		x
Wind farms (already implemented)		x

Types

• 6MW
• 6MW floating

Pressure on Ecology

Not applicable. Pressure calculation is not present (yet) in the Eastern Mediterranean Sea Edition.

Metadata

Not applicable.

At the moment of development of the Eastern Mediterranean Sea edition there were no wind farms in the region. This layer exists just for planning purposes.