No edit summary
Line 22: Line 22:
===Description===
===Description===


Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.
Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.  
 
This data is one of the outputs of the Baltic LINes project and was provided directly by the project's partners (SwAM, RISE). For more info see the full report [https://vasab.org/wp-content/uploads/2019/05/Baltic-LINes-2030-and-2050-Baltic-Sea-Energy-Scenarios.pdf here])


===MSP Challenge===
===MSP Challenge===


Here you can add information about how the layer is implemented or used in the MSP Challenge
This layer is for information purposes only; it can help deciding which areas to give preference when planning for new wind parks.
   
   
=Additional Information=
=Additional Information=
   
   
'''IN THIS TAB EXTENDED CONTENT IS PLACED'''
''In this tab, extended content is placed''
   
   
=Visuals=
=Visuals=
'''ON THIS TAB VISUAL CONTENT IS PLACED'''
''In this tab, visual content is placed''


=Metadata=
=Metadata=
Line 41: Line 43:
Wind Resource Density.
Wind Resource Density.


=== Description ===
===Description===
Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.
Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.


The usable power input is calculated according to the standard methods used for [http://drømstørre.dk/wp-content/wind/miller/windpower%20web/en/tour/wres/powdensi.htm wind atlases])
The usable power input is calculated according to the standard methods used for [http://drømstørre.dk/wp-content/wind/miller/windpower%20web/en/tour/wres/powdensi.htm wind atlases])


=== Creation Date ===
===Creation Date===
Not available. Data received on 12 September 2018.
Not available. Data received on 12 September 2018.


Revision as of 14:33, 8 July 2021

Wind Density
File:Layer Wind Density.png
Layer Info
Category Management
Subcategory Environmental conditions
Editable No
Data type Raster
Types or Values
Very Low
Low
Medium
High
Very High

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.

This data is one of the outputs of the Baltic LINes project and was provided directly by the project's partners (SwAM, RISE). For more info see the full report here)

MSP Challenge

This layer is for information purposes only; it can help deciding which areas to give preference when planning for new wind parks.

In this tab, extended content is placed

In this tab, visual content is placed

Data Source

Baltic LINes project output provided directly by the project's partners (SwAM, RISE). For more info see the full report here)

Original Title

Wind Resource Density.

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.

The usable power input is calculated according to the standard methods used for wind atlases)

Creation Date

Not available. Data received on 12 September 2018.

Methodology

Reclassified values into qualitative classes from "Very Low" to "Very High".

Retrieved from "https://knowledge.mspchallenge.info/index.php?title=BalticSea:Wind_Density&oldid=3362"
This page was last edited on 8 July 2021, at 14:33. Content is available under GPLv3 unless otherwise noted.