Wave Farms

General Information

North Sea

Baltic Sea

Clyde Marine Region

Adriatic Sea

Wave Farms

File:Layer Wave Farms.png
Layer Info
Category	Activities
Sub-category	Energy

Description

Wave Farms are composed by a series of devices, that can harnest the energy of waves. Although this devices are floating, they are achored to the sea floor, so they do not drift away. There are many shapes and sizes of wave energy converters, so we refrain to ilustrate them here.

MSP Challenge

Wave Farms are used to produce green energy, in the MSP challenge the calculated amount of energy produced by a wind farm is based on its area and assumes maximal potential production.

Wave farms are depicted as polygons, i.e., geometric shapes that you can draw in, edit or remove when making a plan. They create the following pressures on the ecosystem:

• Artificial Substrate
• Noise
• Surface Disturbance
• Bottom Disturbace during construction only

Return to energy.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
Country		x
National Shipping Lanes	x
IMO Route	x
Precautionary areas		x
Natura 2000		x
Oil and gas platforms	x

Pressure on Ecology

The ecological pressures are scaled on a level from 0 to 1; with 0 meaning no pressure, and 1 meaning the maximal impact on that pressure.

State	Artificial Substrate	Noise	Surface Disturbance	Bottom Disturbance
Under construction	0.1	0.5	0.5	0.5
In production	0.1	0.1	0.1	0

Wave farms disallow all the bottom trawl, industrial and pelagic trawl, and drift and fixed nets fleets.

Types

• 3MW

Metadata

Data Source

Rijkswaterstaat data drawn by hand to incorporate in a previous version of the MSP Challenge.

Original Title

Not available.

Description

Not available.

Creation Date

Not available. Previous than 2016.

Methodology

Reprojected the data layer to Lambert Azimuthal Equal Area (EPSG:3035).

Not applicable. For the MSP Challenge Baltic Sea Edition, the data regarding wave farms is included under the datalayer "Renewable Energy Sources", please refer to the "Wind Farms" page.

Not applicable.

This data layer is not available in the Clyde Marine Region Edition.

At the time of the development of the MSP Challenge Adriatic Sea Edition (2020), there were no wave farms in the Adriatic Sea. This data layer is for planning purposes only.

Placement Restrictions

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitations.

Warnings - Warnings that it should be done, but won't stop the placement.

	Error	Warning
IMO Route	x

Types

• 3MW

Metadata

Not applicable, there were no wave farms in the Adriatic Sea at the time of the development of the MSP Challenge Adriatic Sea Edition (2020).