(4 intermediate revisions by the same user not shown)
Line 22: Line 22:
===Description===
===Description===


Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.
Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution ([https://vasab.org/wp-content/uploads/2019/05/Baltic-LINes-2030-and-2050-Baltic-Sea-Energy-Scenarios.pdf source]).
 
This data is one of the outputs of the Baltic LINes project and was provided directly by the project's partners (SwAM, RISE). For more info see the full report [https://vasab.org/wp-content/uploads/2019/05/Baltic-LINes-2030-and-2050-Baltic-Sea-Energy-Scenarios.pdf here])


===MSP Challenge===
===MSP Challenge===
Line 39: Line 37:
=Metadata=
=Metadata=
===Data Source===
===Data Source===
Baltic LINes project output provided directly by the project's partners (SwAM, RISE). For more info see the full report [https://vasab.org/wp-content/uploads/2019/05/Baltic-LINes-2030-and-2050-Baltic-Sea-Energy-Scenarios.pdf here])
Baltic LINes project output provided directly by the project's partners (SwAM, RI.SE). For more info see the full report [https://vasab.org/wp-content/uploads/2019/05/Baltic-LINes-2030-and-2050-Baltic-Sea-Energy-Scenarios.pdf here])
===Original Title===
===Original Title===
Wind Resource Density.
Wind Resource Density.
Line 49: Line 47:


===Creation Date===
===Creation Date===
Not available. Data received on 12 September 2018.
Not available. Data received on 2018-09-12.


===Methodology===
===Methodology===
Reclassified values into qualitative classes from "Very Low" to "Very High".  
Reclassified values into qualitative classes from "Very Low" to "Very High". Reprojected the geodata layer to Lambert Azimuthal Equal Area (EPSG:3035).  
<headertabs />
<headertabs />

Latest revision as of 15:00, 19 July 2021

Wind Density
File:Layer Wind Density.png
Layer Info
Category Management
Subcategory Environmental conditions
Editable No
Data type Raster
Types or Values
Very Low
Low
Medium
High
Very High

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution (source).

MSP Challenge

This layer is for information purposes only; it can help deciding which areas to give preference when planning for new wind parks.

In this tab, extended content is placed

In this tab, visual content is placed

Data Source

Baltic LINes project output provided directly by the project's partners (SwAM, RI.SE). For more info see the full report here)

Original Title

Wind Resource Density.

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.

The usable power input is calculated according to the standard methods used for wind atlases)

Creation Date

Not available. Data received on 2018-09-12.

Methodology

Reclassified values into qualitative classes from "Very Low" to "Very High". Reprojected the geodata layer to Lambert Azimuthal Equal Area (EPSG:3035).

Retrieved from "https://knowledge.mspchallenge.info/index.php?title=BalticSea:Wind_Density&oldid=3422"
This page was last edited on 19 July 2021, at 15:00. Content is available under GPLv3 unless otherwise noted.