No edit summary
Line 7: Line 7:
  | header1 = Layer Info
  | header1 = Layer Info
  |  label2 = Category |  data2 = Management/Environmental conditions
  |  label2 = Category |  data2 = Management/Environmental conditions
  |  label3 = Editable |  data3 = No
  |  label3 = Subcategory |  data3 = Management/Environmental conditions
  |  label4 = Data type |  data4 = Raster
|  label4 = Editable |  data4 = No
  |  label5 = Data type |  data5 = Raster
  | header9 = Types or Values
  | header9 = Types or Values
   
   

Revision as of 12:46, 8 July 2021

Wind Density
File:Layer Wind Density.png
Layer Info
Category Management/Environmental conditions
Subcategory Management/Environmental conditions
Editable No
Data type Raster
Types or Values
Very Low
Low
Medium
High
Very High

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.

MSP Challenge

Here you can add information about how the layer is implemented or used in the MSP Challenge

IN THIS TAB EXTENDED CONTENT IS PLACED

ON THIS TAB VISUAL CONTENT IS PLACED

Data Source

Baltic LINes project output provided directly by the project's partners (SwAM, RISE). For more info see the full report here)

Original Title

Wind Resource Density.

Description

Usable power density (in W/m2) of wind speeds in the Baltic Sea based on numerical simulated data from coastDat. Usable power density implies the wind power available based on the wind speed distribution.

The usable power input is calculated according to the standard methods used for wind atlases)

Creation Date

Not available. Data received on 12 September 2018.

Methodology

Reclassified values into qualitative classes from "Very Low" to "Very High".

This page was last edited on 8 July 2021, at 12:46. Content is available under GPLv3 unless otherwise noted.