(Created page with "Category:Energy =General Information= {{Infobox | title = {{PAGENAME}} | image = 200px | headerstyle = background:#595958; color:#f9f9f9; | header1 = Layer Info | label2 = Category | data2 = Activities | label3 = Sub-category | data3 = Energy | label4 = Editable | Yes | }} ==Description== The North Sea has become western Europe’s most important oil and gas production area, yielding high-quality cr...")
 
 
(18 intermediate revisions by 3 users not shown)
Line 14: Line 14:
==Description==
==Description==


 
Oil and gas installations usually consist of fixed platforms where the exploitation of oil and gas occurs.  
The North Sea has become western Europe’s most important oil and gas production area, yielding high-quality crude oil with a low-sulfur content. The use of space for oil and gas extraction requires continuing attention. No shipping or other use is allowed in a 500-metre zone around the platforms. This places local restrictions on the fishing industry, shipping and recreation (craft). It is not permitted to drag fishing nets over the seabed and in the water column in this security zone. When choosing the location for a drilling platform, shipping and other uses must be taken into account. In clearways for shipping, mining activities are, in principle, not permitted. However, most of the interaction is with wind energy areas, especially with regard to helicopter safety zones.  


==MSP Challenge==
==MSP Challenge==


Oil & Gas Installations is a static data layer. They are points that you can place, edit or remove when making a plan.
Oil & Gas Installations is a static data layer. They are points that you can place, edit or remove when making a plan.
Line 28: Line 26:
* [[Bottom Disturbace|Bottom disturbance]]
* [[Bottom Disturbace|Bottom disturbance]]


None of the three fishing fleets ([[Bottom Trawl Catch|bottom trawl]], [[Drift and Fixed Nets Catch|drift and fixed nets]], [[Industrial and Pelagic Trawl Catch|industrial and pelagic trawl]]) fish at oil & gas installations.


Return to [[Categories and Layers#tab%3DEnergy|energy]].
=North Sea=
=North Sea=
The North Sea has become western Europe’s most important oil and gas production area, yielding high-quality crude oil with a low-sulfur content. The use of space for oil and gas extraction requires continuing attention. No shipping or other uses are allowed in a 500-metre zone around the platforms. This places local restrictions on the fishing industry, shipping and recreation (crafts). It is also not permitted to drag fishing nets over the seabed and in the water column in this 500m security zone. When choosing the location for a drilling platform, shipping and other uses must be taken into account. In clearways for shipping, mining activities are, in principle, not permitted. However, most of the interaction is with wind energy areas, especially with regard to helicopter safety zones.
None of the three fishing fleets ([[Bottom Trawl Catch|bottom trawl]], [[Drift and Fixed Nets Catch|drift and fixed nets]], [[Industrial and Pelagic Trawl Catch|industrial and pelagic trawl]]) fish at oil & gas installations.
   
   
==Types==
==Types==
Line 42: Line 42:
==Metadata==
==Metadata==
===Data Source===
===Data Source===
Enter data source for North Sea here.
[http://www.emodnet-humanactivities.eu EMODnet, human activities data portal.]


===Original Title===
===Original Title===
Enter name of the layer at the North Sea source.
Offshore Installations.


===Description===
===Description===
Enter the description of the North Sea dataset here.
"The dataset on offshore installations for Oil and Gas exploitation and exploration activities was created in 2015 by Cogea for the European Marine Observation and Data Network (EMODnet). It is the result of the aggregation and harmonization of datasets provided by several EU and non-EU sources. It is updated every year, and is available for viewing and download on EMODnet - Human Activities web portal (www.emodnet-humanactivities.eu). The dataset contains points representing offshore installations and where available each point has the following attributes: ID, name, country, location block, operator, production start year, primary production, current status, category and function of the installation, sub-structure and topside weights (tonnes), water depth (metres), distance to coast (metres) and remarks. The OSPAR commission source covers data for Germany, Ireland, Spain and the United Kingdom, while for Italy data have been collected and harmonized from the Italian Ministry of Economic Development, for Norway from the Norwegian Petroleum Directorate, for Denmark from the Danish Energy Agency, for the Netherlands from the TNO - Geological Survey of the Netherlands, for Croatia from the Croatian Hydrocarbon Agency, from Marine Traffic and Helcom data on Polish and Russian installations in the Baltic Sea, from Marine Traffic data on Bulgarian, Russian and Ukrainian installations in the Black Sea, Lybian and Spanish installations in the Mediterranean Sea. Compared with the previous version this new version has been updated for all countries."
 
Description retrieved from [http://www.emodnet-humanactivities.eu EMODnet Human Activities]' metadata page for this resource (2022-07-04).


===Creation Date===
===Creation Date===
yyyy-mm-dd North Sea
Created on 2015-08-06, published on 2015-08-14, and reviewed on 2020-10-21.


===Methodology===
===Methodology===
Enter here how the layer was prepared to be integrated into the MSP Challenge North Sea Edition.
Integrated in the MSP Platform as is, with one adjustment: the types "derogation" and "under construction" were joined under the type "others".


=Baltic Sea=
=Baltic Sea=
 
Note that in the Baltic Sea Edition, the oil and gas installations are called "oil and gas platforms". Both existing oil and gas platforms in the Baltic Sea are operational, but for planning purposes, the MSP Challenge also considers "decomissioned", "closed", or "other" states for oil and gas platforms. 
==Types==
==Types==
Baltic Sea types here
* Operational (0MW)
* Decommissioned (0MW)
* Closed (0MW)
* Other (0MW)


==Metadata==
==Metadata==
===Data Source===
===Data Source===
Enter data source for Baltic Sea here.
 
HELCOM HOLAS II dataset: Oil platforms


===Original Title===
===Original Title===
Enter name of the layer at the Baltic Sea source.
 
Oil platforms


===Description===
===Description===
Enter the description of the Baltic Sea dataset here.
 
"This dataset contains point data describing the location of oil platforms in the Baltic Sea.
 
The dataset is complete in Baltic sea coverage as it contains two known oil platforms."
 
Description retrieved from [https://maps.helcom.fi/website/mapservice/ HELCOM's] metadata page for this resource (2021-07-19).


===Creation Date===
===Creation Date===
yyyy-mm-dd Baltic Sea
 
2016-04-06


===Methodology===
===Methodology===
Enter here how the layer was prepared to be integrated into the MSP Challenge Baltic Sea Edition.


The layer was implemented without modifications. 
==Western Baltic Sea==
The Oil and Gas Installations layer in the Western Baltic Sea Edition remains consistent with  that featured in the Baltic Sea edition.
=Clyde Marine Region=
=Clyde Marine Region=
Not applicable.
At the moment of development of the Clyde Marine Region edition (2017) there were no oil and gas platforms in the region, nor expectations that there would be such platforms in the future. Therefore this datalayer is not available in this edition of the MSP Challenge.
=Adriatic Sea=


==Types==
==Types==
Clyde Marine Region types here
* Operational
* Closed


==Metadata==
==Metadata==
===Data Source===
===Data Source===
Enter data source for Clyde Marine Region here.
'''For the Italian EEZ:''' [https://unmig.mise.gov.it/index.php/it/dati/ricerca-e-coltivazione-di-idrocarburi/piattaforme-marine ministry of economic development -SID portal]
 
'''Other countries:'''
 
[https://www.emodnet-humanactivities.eu/ EMODnet] (From this geographical area, only Italy and Croatia provided data)


===Original Title===
===Original Title===
Enter name of the layer at the Clyde Marine Region source.
 
'''For the Italian EEZ:'''  "Piattaforme marine" (Marine platforms)
 
'''Other countries:''' Offshore Installations


===Description===
===Description===
Enter the description of the Clyde Marine Region dataset here.
'''For the Italian EEZ:''' List of the marine structures, including platforms with emerged structures, submerged wellheads and floating temporary storage units.
 
'''Other countries:'''
 
"The dataset on offshore installations for Oil and Gas exploitation and exploration activities was created in 2015 by Cogea for the European Marine Observation and Data Network (EMODnet). It is the result of the aggregation and harmonization of datasets provided by several EU and non-EU sources. It is updated every year, and is available for viewing and download on EMODnet - Human Activities web portal (www.emodnet-humanactivities.eu). The dataset contains points representing offshore installations and where available each point has the following attributes: ID, name, country, location block, operator, production start year, primary production, current status, category and function of the installation, sub-structure and topside weights (tonnes), water depth (metres), distance to coast (metres) and remarks. The OSPAR commission source covers data for Germany, Ireland, Spain and the United Kingdom, while for Italy data have been collected and harmonized from the Italian Ministry of Economic Development, for Norway from the Norwegian Petroleum Directorate, for Denmark from the Danish Energy Agency, for the Netherlands from the TNO - Geological Survey of the Netherlands, for Croatia from the Croatian Hydrocarbon Agency, from Marine Traffic and Helcom data on Polish and Russian installations in the Baltic Sea, from Marine Traffic data on Bulgarian, Russian and Ukrainian installations in the Black Sea, Lybian and Spanish installations in the Mediterranean Sea. Compared with the previous version this new version has been updated for all countries."
 
Description retrieved from [http://www.emodnet-humanactivities.eu EMODnet Human Activities]' metadata page for this resource (2022-07-04).


===Creation Date===
===Creation Date===
yyyy-mm-dd Clyde Marine Region
Combined layer provided on  2020/08/27.


===Methodology===
===Methodology===
Enter here how the layer was prepared to be integrated into the MSP Challenge Clyde Marine Region Edition.


=Adriatic Sea=
The data layer was implemented as provided by the project partner ([http://www.ismar.cnr.it/ CNR-ISMAR]).
 
= Eastern Mediterranean Sea =
Due to the absence of oil & gas installations in the Mediterranean Sea there are two layers present, one is the oil & gas installations, for planning purposes and the other one are the existing boreholes.
 
== 1) Oil & Gas Installations ==
 
== Types ==


==Types==
* Operational
Adriatic Sea types here
* Decommissioned
* Closed
* Other


==Metadata==
== Metadata ==
===Data Source===
This layer only exists in the Eastern Mediterranean Sea edition for planning purposes ('''the layer is empty''').
Enter data source for Adriatic Sea here.


===Original Title===
== 2) Boreholes ==
Enter name of the layer at the Adriatic Sea source.
The existing boreholes in the Eastern Mediterranean are documented by EMODnet, but there is not much information about the status of these boreholes. The layer is only for viewing as it is not a plannable layer.  


===Description===
== Types ==
Enter the description of the Adriatic Sea dataset here.
Not applicable


===Creation Date===
== Metadata ==
yyyy-mm-dd Adriatic Sea


===Data Source===
[https://emodnet.ec.europa.eu/geonetwork/srv/eng/catalog.search#/metadata/d16bc9d4-84eb-4713-87ff-d1d978616f0f EMODnet]
===Original Title===
"EMODnet_HA_OG_Wells_20230222"
===Description===
"The dataset on offshore wells for Oil and Gas industry activities in the EU was created in 2014 by Cogea for the European Marine Observation and Data Network (EMODnet). It is the result of the aggregation and harmonization of datasets provided by several EU and non-EU sources. It is updated every year, and is available for viewing and download on the EMODnet web portal (Human Activities, <nowiki>https://emodnet.ec.europa.eu/en/human-activities</nowiki>). It contains points representing offshore wells drilled in the following countries: Croatia, Cyprus, Denmark, Faroe Islands, France, Germany, Greece (only for western coast), Ireland, Italy, Latvia, Malta, Montenegro, Netherlands, Norway, Poland, Portugal, Spain, and United Kingdom. Where available each point has the following attributes: status (active, abandoned, other, suspended, N/A), country, code, name, year (spud date), purpose (exploitation, exploration, other), content (crude oil, natural gas, crude oil and natural gas, natural gas and crude oil, dry, other), operator, drilling company/facility, distance to coast (metres) and water depth (metres). Compared with the previous version this new version has been updated for most of the countries that have published or sent their last release of data."
===Methodology===
===Methodology===
Enter here how the layer was prepared to be integrated into the MSP Challenge Adriatic Sea Edition.
Using the layer through web feature service.  


<headertabs/>
<headertabs/>

Latest revision as of 14:45, 23 January 2025

Oil & Gas Installations
Layer Oil & Gas Installations.png
Layer Info
Category Activities
Sub-category Energy

Description

Oil and gas installations usually consist of fixed platforms where the exploitation of oil and gas occurs.

MSP Challenge

Oil & Gas Installations is a static data layer. They are points that you can place, edit or remove when making a plan.

Oil & gas installations create the following pressures on the ecosystem:


Return to energy.

This page was last edited on 23 January 2025, at 14:45. Content is available under GPLv3 unless otherwise noted.