(NS)Wind Farm

• <btn data-toggle="tab" class="">#tab1|General Information</btn>
• <btn data-toggle="tab" class="">#tab2|Additional Information</btn>
• <btn data-toggle="tab" class="">#tab3|Visuals</btn>

Wind Farms

Layer Info
Category	Energy
Energy Type	Yes
Editable	Unknown
Geometry Type	0m
DataOwner	-150m
Placement Min	x MWh/KM2
Placement Max	x MWh/KM2
Production Min	Wind_Speed
Production Max	Green
Resource Required	Polygon
Types
TypeTemplate

Description:

Offshore wind power or offshore wind energy is the use of wind farms constructed in bodies of water, usually in the ocean on the continental shelf, to harvest wind energy to generate electricity. Higher wind speeds are available offshore compared to on land, so offshore wind power’s contribution in terms of electricity supplied is higher, and NIMBY opposition to construction is usually much weaker. Unlike the typical usage of the term "offshore" in the marine industry, offshore wind power includes inshore water areas such as lakes, fjords and sheltered coastal areas, utilizing traditional fixed-bottom wind turbine technologies, as well as deeper-water areas utilizing floating wind turbines.

MSP Challenge 2050:

Within the MSP Challenge Game Wind Farms are used to produce green energy, the production amount is calculated based on the maximum amount of energy that can be produced in the designated area.

Placement Restrictions:

The placement restrictions decide whether the overlap of spatial elements causes:

Errors - Impossible to place these layers on top of each other due to physical limitation.

Warnings - Warnings that it should be done, but wont stop the placement.

	Error	Warning
Country		x
Shipping Lane	x
IMO Route	x
Port	x
Anchorage	x

Type Overview:

The Wind Farm layer has "To Be Defined" types, this overview shows the core information, for further info you can navigate to the type using the InfoBox on the General Information tab.

	Bathymetry Min	Bathymetry Max	Production per KM2
Type x	x m	x m	x MW/km2

Pressure on Ecology:

The ecological pressures are scaled on a level from 0 to 1, with 0 having none, and 1 having the maximal impact on that pressure.

State	Artificial Substrate	Noise	Surface Disturbance	Bottom Disturbance
Under construction	0.4	0.8	0.5	0.6
In production	0.4	0.1	0.1