(Created page with "<ul class="nav nav-tabs"> <li class="active"><btn data-toggle="tab" class="">#tab1|General Information</btn></li> <li><btn data-toggle="tab" class="">#tab2|Additional I...") |
No edit summary |
||
| Line 17: | Line 17: | ||
| label5 = Editable | data5 = Yes | | label5 = Editable | data5 = Yes | ||
| label6 = Geometry Type| data6 = Polygon | | label6 = Geometry Type| data6 = Polygon | ||
| label7 = | | label7 = Data source | data7 = OSPAR, some manual updates | ||
| label8 = [[(NS)Bathymetry|Bathymetry]] Min| data8 = 0m | | label8 = [[(NS)Bathymetry|Bathymetry]] Min| data8 = 0m | ||
| label9 = [[(NS)Bathymetry|Bathymetry]] Max| data9 = -150m | | label9 = [[(NS)Bathymetry|Bathymetry]] Max| data9 = -150m | ||
Revision as of 09:17, 14 April 2018
 | |
| Layer Info | |
|---|---|
| Category | Activities |
| Sub-Category | Energy |
| Energy Type | Green |
| Editable | Yes |
| Geometry Type | Polygon |
| Data source | OSPAR, some manual updates |
| Bathymetry Min | 0m |
| Bathymetry Max | -150m |
| Production Min | x MWh/KM2 |
| Production Max | x MWh/KM2 |
| Resource Required | Wind Speed |
| Types | |
| 6MW | |
| 9MW | |
| Floater | |
Description:
Offshore wind power or offshore wind energy is the use of wind farms constructed in bodies of water, usually in the ocean on the continental shelf, to harvest wind energy to generate electricity. Higher wind speeds are available offshore compared to on land, so offshore wind power’s contribution in terms of electricity supplied is higher, and NIMBY opposition to construction is usually much weaker. Unlike the typical usage of the term "offshore" in the marine industry, offshore wind power includes inshore water areas such as lakes, fjords and sheltered coastal areas, utilizing traditional fixed-bottom wind turbine technologies, as well as deeper-water areas utilizing floating wind turbines.
@Wikipedia
MSP Challenge 2050:
Within the MSP Challenge Game Wind Farms are used to produce green energy, the production amount is calculated based on the maximum amount of energy that can be produced in the designated area.
Placement Restrictions:
The placement restrictions decide whether the overlap of spatial elements causes:
Errors - Impossible to place these layers on top of each other due to physical limitation.
Warnings - Warnings that it should be done, but wont stop the placement.
| Error | Warning | |
|---|---|---|
| Country | x | |
| Shipping Lane | x | |
| IMO Route | x | |
| Port | x | |
| Anchorage | x |
Type Overview:
The Wind Farm layer has "To Be Defined" types, this overview shows the core information, for further info you can navigate to the type using the InfoBox on the General Information tab.
| Bathymetry Min | Bathymetry Max | Production per KM2 | |
|---|---|---|---|
| Type x | x m | x m | x MW/km2 |
Pressure on Ecology:
The ecological pressures are scaled on a level from 0 to 1, with 0 having none, and 1 having the maximal impact on that pressure.
| State | Artificial Substrate | Noise | Surface Disturbance | Bottom Disturbance |
|---|---|---|---|---|
| Under construction | 0.4 | 0.8 | 0.5 | 0.6 |
| In production | 0.4 | 0.1 | 0.1 |
Energy Calculation:
The energy production is calculated using the following algorithm: N/A
Co-funded by the European Union.