| header1 = Layer Info ...he '''Sandeel''' layer. For more information about the interaction of this layer within the MSP Challenge go to the [[Sandeel|Sandeel information page]].

| header1 = Layer Info Not applicable. This layer is not available in the MSP Challenge North Sea Edition.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info

| header1 = Layer Info The fossil fuel availability data layer shows where fossil fuel deposits were identified and indicates roughly the

| header1 = Layer Info Ferry Intensity is a month-by-month, computer generated data layer showing a 'heat map' of as yet limited ferries. The shipping simulation con

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Bathing waters is a static layer. This adds no pressure on the ecosystem.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The layer was reprojected to Lambert Azimuthal Equal Area (EPSG:3035). The geometries

| header1 = Layer Info This is a month-by-month, computer generated data layer following the identification of an [[(NS)Protected Areas|MPA]] of the type

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info Bottom Trawl Catch is a month-by-month, computer-generated data layer following this fleet's fishing catch calculated by the ecosystem simulation

| header1 = Layer Info The Anchorages layer is a static data layer. Anchorages are polygons, i.e., geometric shapes that you can draw in, edit

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Dolphins is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info Ferry Intensity is a month-by-month, computer generated data layer showing a 'heat map' of as yet limited ferries. The shipping simulation con

| header1 = Layer Info ...er only exists in the NorthSea Digitwin edition for planning purposes (the layer is empty).

| header1 = Layer Info Windfarm indifferent seabirds is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info Electricity Cables is a static data layer. They are point-by-point lines that you can draw in, edit or remove when ma

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info In the MSP Challenge, the salinity data layer is static and does not influence any of the models.

| header1 = Layer Info }}The fishing income data layer represents the average economic value brought by the fishing activity in a

| title = NAME OF THE LAYER/TYPE | header1 = Layer Info

| header1 = Layer Info Electricity Cables is a static data layer. They are point-by-point lines that you can draw in, edit or remove when ma

| header1 = Layer Info Eutrophication Status is a static data layer.

| header1 = Layer Info Not applicable. This data layer is not available in the Baltic Sea Edition.

| header1 = Layer Info Artificial substrate is a month-by-month computer generated data layer, based on any of the following human activities:

| header1 = Layer Info Cod is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more inf

| header1 = Layer Info Not applicable. This layer is not yet available in the MSP Challenge North Sea Edition.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info

| header1 = Layer Info This layer is not available in the North Sea Edition.

| header1 = Layer Info Passenger Intensity is a month-by-month, computer generated data layer showing a 'heat map' of main passenger cruise line traffic. The shipping si

| header1 = Layer Info

| header1 = Layer Info ...th Sea region, within 10km from the coast and within 2km from a river. The layer was styled according to the Farm Type attribute and the farm types "mixed (

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The layer was reprojected to Lambert Azimuthal Equal Area (EPSG:3035). The geometries

| header1 = Layer Info Benthic invertebrates is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info Drift and Fixed Nets Catch is a month-by-month, computer generated data layer following this fleet's fishing catch calculated by the ecosystem simulation

| header1 = Layer Info The data layer was clipped to the North Sea Region.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Bird Watching data layer reflects popular areas for bird watching.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Cod fisheries closure is a status layer that contributes for the protection agains the fleets that target cod, this

| header1 = Layer Info ...f one single data layer. This is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info Eutrophication Status is a static data layer for reference only.

| header1 = Layer Info ...tect sensible or declining species or even habitats. The fisheries closure layer shows where fishing is not allowed for one or more fleets.

| header1 = Layer Info Cities is a static data layer. Obviously not all cities are included; only the largest, major cities are

| header1 = Layer Info Enter name of the layer at the North Sea source.

| header1 = Layer Info Sediments is a static data layer, providing useful information for planning different human activities, e.g.

| header1 = Layer Info This layer is not present in the Eastern Mediterranean Sea.<headertabs/>

| header1 = Layer Info Bottom disturbance is a month-by-month, computer generated data layer, based on any of the following human activities:

| header1 = Layer Info Demersal fish is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more in

| header1 = Layer Info Not applicable. This layer is not yet available in the MSP Challenge North Sea Edition.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | label3 = Editable | data3 = Can users edit this layer?

| header1 = Layer Info The coastal regions layer is just for background information.

| header1 = Layer Info Not applicable. There are no types in this layer.

| header1 = Layer Info ...[[(NS)Ferry Intensity|ferry]] intensity heat maps together. Therefore this layer provides a complete overview of all simulated ship traffic within as well a

| header1 = Layer Info The Coastal Municipalities layer shows the limits of the coastal municipalities and the human pressure on th

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Noise layer is calculated on a month-by-month basis considering the existing (and plann

| header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info ...trial and Pelagic Trawl Catch is a month-by-month, computer generated data layer following this fleet's fishing efforts calculated by the ecosystem simulati

| header1 = Layer Info The data layer was clipped to the North Sea Region.

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| header1 = Layer Info The Sea Angling from Shore layer shows popular areas for recreational fishing on shore.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...ive Demersal Catch|Passive Demersal]] fleets are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info Ice coverage is a static layer, just for reference.

| header1 = Layer Info ...EMODnet data layer used was the "Dredge Spoil Dumping", the polygon-based layer was used.

| header1 = Layer Info Cities is a static data layer. Obviously not all cities are included; only the largest, major cities are

| header1 = Layer Info The Pipelines layer is a static data layer. Pipelines are point-by-point lines that you can draw in, edit or remove wh

| header1 = Layer Info Fossil Fuel Availability is a static data layer representing general/rough indications of oil and gas fields as far as we k

| header1 = Layer Info ...Region edition there was no offshore energy production in the region. This layer exists just for planning purposes.

| header1 = Layer Info Noise is a month-by-month computer generated data layer, based on any of the following human activities:

| header1 = Layer Info Flatfish is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more inf

| header1 = Layer Info Not applicable. This layer is not yet available in the MSP Challenge North Sea Edition.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info This layer is just a background layer.

| header1 = Layer Info The large fish indicator a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info Tanker Intensity is a month-by-month, computer generated data layer showing a 'heat map' of tanker shipping. The shipping simulation considers

| header1 = Layer Info | header10 = Layer

| image = [[File:Layer Aquaculture.png|200px]] | header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...ate is subsequently a pressure on the ecosystem. This means that this data layer is fed into the ecosystem simulation (EwE), and the ecosystem simulation wi

| header1 = Layer Info Cod is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| image = [[File:Layer Bottom Trawl Catch.png|200px]] | header1 = Layer Info

| header1 = Layer Info The data layer was clipped to the North Sea Region.

| header1 = Layer Info

| header1 = Layer Info The Sea Angling from Boats layer shows popular areas for recreational fishing at sea.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...areas where [[Pelagic Catch|Pelagic fleets]] are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info Bottom Trawl Catch is a month-by-month, computer generated data layer following this fleet's fishing efforts calculated by the ecosystem simulati

| header1 = Layer Info Oil & Gas Installations is a static data layer. They are points that you can place, edit or remove when making a plan.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info This layer is for information purposes only; it can help deciding which areas to give

| header1 = Layer Info Joint layer created on 2018/03.

| header1 = Layer Info Telecom Cables is a static data layer. They are point-by-point lines that you can draw in, edit or remove when ma

| header1 = Layer Info Not applicable. This layer is not available in the North Sea Edition.

| header1 = Layer Info

| header1 = Layer Info ...Region edition there was no offshore energy production in the region. This layer exists just for planning purposes.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Mackerel is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more inf

| header1 = Layer Info Here you can put a description of the layer

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...MSP Challenge editions (only the Adriatic Sea at the time of writing). The layer is just a useful indication for the red country planners, the plans are app

| header1 = Layer Info Maintenance Intensity is a month-by-month, computer generated data layer showing a 'heat map' of maintenance ship traffic. The shipping simulation g

| header1 = Layer Info

| header1 = Layer Info The Marinas layer is a static data layer. Marinas are represented by points, you can add or remove marinas when maki

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Bottom Disturbance layer is calculated on a month-by-month basis considering the existing (and plann

| header1 = Layer Info Demersal fish is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info Passive demersal catch is a month-by-month, computer-generated data layer following this fleet's fishing catch calculated by the ecosystem simulation

| header1 = Layer Info This layer is only present in the '''Digitwin North Sea Edition'''.

| header1 = Layer Info Currents Speed is a static raster data layer.

| header1 = Layer Info The General Boating Areas layer shows popular areas for boating in general.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...cts areas where [[Seine Catch|Seine fleets]] are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info Drift and Fixed Nets Catch is a month-by-month, computer generated data layer following this fleet's fishing efforts calculated by the ecosystem simulati

| header1 = Layer Info The Pipelines layer is a static data layer. Pipelines are point-by-point lines that you can draw in, edit or remove wh

| header1 = Layer Info | header10 = Layer

====Layers & Layer Manager====

| header1 = Layer Info This layer is for information purposes only; it can help deciding which areas to give

| header1 = Layer Info Data layer implemented as provided by project partners, assuming the routes are applic

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Potential Cables layer depicts the cables planned to serve the [[Potential Wind Farms]].

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Oil & Gas Installations is a static data layer. They are points that you can place, edit or remove when making a plan.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Herring is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more inf

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Shannon Diversity Indicator a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info Cargo Intensity is a month-by-month, computer generated data layer showing a 'heat map' of cargo shipping. The shipping simulation considers b

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info The Boating Clubs data layer shows the location of sport clubs that promote boating.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...nce is subsequently a pressure on the ecosystem. This means that this data layer is fed into the ecosystem simulation (EwE), and the ecosystem simulation wi

If you want to add a new layer to the knowledge base, this page should contain the main information that y The infobox provides an overview into important details of a layer. You can double click on the InfoBox to view its properties and change the

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...surface layer, generally warmer and less dense than the other layers. This layer is usually well-mixed due to wind, wave and current action, and extents fro

| header1 = Layer Info | header10 = Utilizing Layer

| image = [[File:Layer Industrial and Pelagic Trawl.png|200px]] | header1 = Layer Info

| header1 = Layer Info This layer is not available in the North Sea Edition.

| header1 = Layer Info Passenger Intensity is a month-by-month, computer generated data layer showing a 'heat map' of main passenger cruise line traffic. The shipping si

| header1 = Layer Info The Recreational Boating Intensity data layer reflects the intensity of recreational boats

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...here [[Nephrops Trawl Catch|Nephrop fleets]] are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info ...trial and Pelagic Trawl Catch is a month-by-month, computer generated data layer following this fleet's fishing efforts calculated by the ecosystem simulati

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| Banner_Content = Click here to get more information about adding a new layer or type to the knowledge Base

| header1 = Layer Info

| header1 = Layer Info The wind speed layer is static; users can consult it, for instance, to optimise wind energy prod

| header1 = Layer Info ...t to Lambert Azimuthal Equal Area (EPSG:3035). Extracted features from the layer that covered the sea area and simplified extracted features.

| header1 = Layer Info

| header1 = Layer Info This data layer represents the main energy distribution cables on land.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Oil & Gas Licensed Areas is a static data layer. They are polygons, i.e., geometric shapes that you can draw in, edit or re

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The data layer "Sandeel" in the North Sea Edition of the MSP Challenge also includes '''[[

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The maritime compartments layer reflects legal political and administrative boundaries.

| header1 = Layer Info This layer is computer generated by our Shipping Model.

| header1 = Layer Info Unused Cables is a static data layer. They are point-by-point lines that you can draw in, edit or remove when ma

| header1 = Layer Info The Scuba Diving layer show popular areas among scuba divers.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...tive Demersal Catch|Active Demersal]] fleets are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info Benthic invertebrates is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info The Wind Farm layer has "To Be Defined" types, this overview shows the core information, for fu

| header1 = Layer Info

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info The seine catch data layer shows a heatmap of the quantity of fish caught by the seine fleet.

| header1 = Layer Info Harbours area is just an descriptive static layer.

| header1 = Layer Info Cargo Intensity is a month-by-month, computer generated data layer showing a 'heat map' of cargo shipping. The shipping simulation considers b

| header1 = Layer Info The data layer 'Wind Farms - Implemented" is retrieved from [https://emodnet.ec.europa.eu/

| header1 = Layer Info Maintenance Intensity is a month-by-month, computer generated data layer showing a 'heat map' of maintenance ship traffic. The shipping simulation g

| header1 = Layer Info ...where [[Scallop Fleet Catch|Scallop Fleets]] are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info The Shannon Diversity Indicator a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

The infobox provides an overview into important details of a layer. You can double click on the InfoBox to view its properties and change the ...R for Clyde Region. Immediately after the closing bracket, the name of the layer is added. This results in page names such as (NS)Cities.

| header1 = Layer Info

| header1 = Layer Info Wave Height is a static data layer, providing useful information for planning different human activities, e.g.

| header1 = Layer Info ...by the shipping model to simulate the shipping behaviour near ports. This layer does not contribute to pressures on the ecosystem.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The "Cables - Other" data layer contains data regarding cables that are not included in other specific cabl

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Not applicable. This layer is not available in the North Sea Edition.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info Windfarm indifferent seabird is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE). For more inf

| header1 = Layer Info | header10 = Utilizing Layer

| header1 = Layer Info

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info At the moment the Marine Reporting Units is just a static layer, key performance indicators refer to a EEZ or a region depending on the KPI

| header1 = Layer Info ...rth Sea region, within 10km from the coast and within 2km from rivers. The layer was styled according to the Farm Type attribute and the farm types "Other s

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info The Canoeing layer shows popular areas for canoeing.

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info ...al and Pelagic Trawl Catch|Industrial Trawl Fishing]] is not allowed. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info Flatfish is a month-by-month, computer generated data layer following calculations made by the ecosystem simulation (EwE).

| header1 = Layer Info | header10 = Layer

| header1 = Layer Info

| header1 = Layer Info Reprojected the geodata layer to Lambert Azimuthal Equal Area (EPSG:3035).

| header1 = Layer Info The nephrops trawl catch data layer shows a heatmap of the quantity of fish caught by the nephrops trawl flee

| header1 = Layer Info Shipping recreation total is a static layer and does not contribute to the pressures on the ecosystem.

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| header1 = Layer Info Reprojected the data layer to Lambert Azimuthal Equal Area (EPSG:3035).

| header1 = Layer Info The Anchorages layer is a static data layer. Anchorages are polygons, i.e., geometric shapes that you can draw in, edit

| header1 = Layer Info ...ots and creel fleet|Pots and Creels fleets]] are not allowed to fish. This layer is calculated by the simulations in the MSP Challenge.

| header1 = Layer Info '''IN THIS TAB MAIN INFO ABOUT THE LAYER IS PLACED'''

| header1 = Layer Info Oil & Gas Licensed Areas is a static data layer. They are polygons, i.e., geometric shapes that you can draw in, edit or re

...ers will be able to update the information linked to generic plannig unit layer. ...odificare le informazioni associate a ciascuna unità di pianificazione del layer ''Generic Plannin Unit''.

| header1 = Layer Info

| header1 = Layer Info The Recreational Interest layer is a static data layer. These areas are polygons, i.e., geometric shapes that you can draw in, edi

| header1 = Layer Info Reprojected the data layer to Lambert Azimuthal Equal Area (EPSG:3035).

| header1 = Layer Info Wind Speed is a data layer used for placing spatial elements. It can be used as a Infinite Resource by

| header1 = Layer Info Lighthouses is a static layer. This adds no pressure on the ecosystem.